ULYSSES -photo life laboratories-

Leather Strap [ 70% GRANDE ]

ULYSSES -photo life laboratories- — 2026-05-03T17:35:33+09:00

The 70% GRANDE is the full leather camera strap which has been born between our CLASSICO GRANDE, which has the widest part 42mm neck holder and our 17mm wide slim straight form strap the CLASSICO.

As compact single lens-reflex cameras which are slightly smaller than conventional single-lens reflex cameras have got more and more popularity, we have heard from our customers say “the CLASSICO is too slender for their cameras but the CLASSICO GRANDE is too broad. In response to the voice, we have made this model with 30mm wide neck holder as between.

Today it is general that a camera strap uses synthetic fiber and a nylon tape, but the leather strap wasn't unusual until only about 30 years from now. It wasn't dressing-up but for the practical use.

Since the leather is used for all the parts of the strap, it has integrated appearance and you can enjoy the texture.

The 70% GRANDE is for all the camera fans who have deep affection to your tool and want to keep it for a long period of time.

[ The Streamline Form Succeeded by CLASSICO GRANDE ]
The widest part of the strap is 30 mm. It is neither too broad nor too slim. It has the perfect fit to you neck and distributes the weight evenly-- whether around your neck or your shoulder.

[ Two Different kinds of leather are Used ]
Two different kinds of leather are used for the strap: for the surface, the highest-grade vegetable-tanned Italian Pueblo leather is employed. Vegetable-tanned Minerva leather—of course from the same tannery, is used for the back of the strap.
The combination of the delicate damage processed Pueblo leather and Minerva leather with its crimped surface makes the strap strong yet flexible.
Furthermore, the side of the strap (coba), has been further enhanced by detailed polishing—all hand done by the amazing craftsman which understandably takes a considerable amount of time.
The more you use it, the more you can enjoy the vintage effect as the leather ages.

[ Our First Priority is Given to Protect the Camera ]
Since no metal is used for this strap, your important camera will not be damaged even if the strap is wound tightly.

[ Attach to Any Cameras ]
You can use this strap directly to cameras equipped with 10 mm wide slit eyelet such as camera series from Canon and to the cameras with the triangular rings installed to the cameras from the shipment.
By using attached double rings, you can use the strap for cameras from Nikon, Olympus, PENTAX, SONY, Leica, and so on…basically any camera which has the round eyelets to connect a strap.
Please don’t open the ring too wide.

[ Specifications ]
Material; Leather, resin
Recommended load: Up to 2.0 kg
Made in Japan/handmaid

Leather Camera Strap [CLASSICO DRITTO]

ULYSSES -photo life laboratories- — 2026-05-03T14:55:31+09:00

DRITTO is the Italian word meaning “straight”. The CLASSICO DRITTO is Ulysses’ take on our new slender straight-line strap. The exciting thing for us here is that the CLASSICO DRITTO is designed without any joint or seam from the shoulder pad to the end of the strap as its name suggests. You can use this strap for any single-lens reflex, mirrorless digital camera　and rangefinder will be perfect for the DRITTO, but the camera has to be equipped with round eyelets.

[ Two Different kinds of leather are Used ]
Two different kinds of leather are used for the neck part of the strap: for the surface, the highest-grade vegetable-tanned Italian Pueblo leather is employed. Vegetable-tanned Minerva leather—of course from the same tannery, is used for the back of the strap.

The combination of the delicate damage processed Pueblo leather and Minerva leather with its crimped surface makes the strap strong yet flexible. (The color of the back of the strap is tan for its entirety.)

[ Luxurious Leather Strap ]
For us at Ulysses, it’s a very special thing for us to do—to cut down a 120cm long L size strap, as well as 105cm long M size strap, from one sheet of leather and make the strap seamless. Since the number of leather straps to be removed from the one piece of material is limited, here at Ulysses, we do everything in our power to set us apart from the rest. To us—we specify in luxury goods and by doing this we enforce it.

[ Ring Guard ]
A ring guard is attached to the strap. This protects the camera from getting marked or scratched by the metal ring. Another advantage of the ring being fixed with a ring guard, so the ring doesn’t turn about freely nor the strap be twisted.

*Please Note
You can use this strap for the camera with round eyelets but not with any slit type eyelets. You need to remove the triangle rings attached to the camera before installing your strap.

Please refer to How to Remove the Triangle Rings.

[ Our First Priority is Always to Protect the Camera ]
Since no metal is used for the strap itself, you can twist the strap around your camera wherever and whenever.

[ Specifications ]
Material; Leather, metal (ring)
Recommended load: Up to 1.5 kg
Made in Japan/handcrafted

----------------------Customer Reviews----------------------
Nickname: Sam
Rating: 5/5 Excellent

This is the third Classico Dritto I've ordered from Ulysses. I've tried straps from many manufacturers but can't find any better than Ulysses. The leather is very high quality and softens very quickly. It's flexible, comfortable, and unobtrusive. The perfect accompaniment to my Leica M11-P. Recommended!

----------
Nickname: Mikey
Rating: 5/5 Excellent

Looks great, feels perfect. I love these straps and haven't been able to find anything else that quite matches them.

----------
Nickname: Scott Garrett
Rating: 5/5 Excellent

Beautifully made… it looks like somebody really cared about every stitch. And it smells great too!

----------
Nickname: Morten Odgaard
Rating: 5/5 Excellent

I purchased a brown Classico Dritto leather strap for my Fujifilm X100. It is very beautifull and well made and fits the camera perfectly!

----------
Nickname: Andy Ogilvy (aofoto.nl)
Rating: 5/5 Excellent

The Classico Dritto strap is very well made and the finish / quality is excellent and to be highly recommended.

I found Ulysses searching the internet for half cases for my Fuji X-Pro1, none were available, so I eventually bought the Fuji leather case, which is also very nice.

----------
Nickname: David T
Rating: 5/5 Excellent!

Extremely pleased with the quality and workmanship of this product (Leather Camera Strap [CLASSICO DRITTO]). Shipped immediately and arrival in the US within days. Superb packaging and service. Very happy overall! Thank you!

----------
Nickname: Jaquesryan
Rating: 5/5 Excellent!

This is the highest-quality leather neckstrap I have ever seen. It is very solidly made and the perfect length. I will definitely be coming back to shop at Ulysses.

----------

Leather Camera Strap [CLASSICO]

ULYSSES -photo life laboratories- — 2026-05-02T18:00:40+09:00

Simple leather strap that you can use for a single-lens reflex camera. Although it gained popularity that a strap uses a nylon tape for a junction with a camera these days, it wasn’t mere that strap was made of total leather just 20years ago. "Classico" means "traditional and classic" in Italian. Since the leather is used for all the parts of the strap, it has integrated appearance and you can enjoy the texture.

For all the camera fans who have deep affection to your tool and want to keep it for a long period of time.

[ Two Different kinds of leather are Used ]
Two different kinds of leather are used for the strap: for the surface, the highest-grade vegetable-tanned Italian Pueblo leather is employed. Vegetable-tanned Minerva leather—of course from the same tannery, is used for the back of the strap.
The combination of the delicate damage processed Pueblo leather and Minerva leather with its crimped surface makes the strap strong yet flexible.

[Great Strength and Flexibility]
Two different kinds of leather are used to make the strap strong and agile. The Classico is made of only Italian oiled Vaqueta leather and polished carefully to the coba.

[No Metal Parts]
To protect your camera, no metal parts are used; the adjuster at the end of the strap is made of durable plastic. All junction and seams are sewed with the upmost care. Since no metal is used for this strap, your important camera will not be damaged even if the strap is wound tightly.

[Specifications]
Material; Leather, resin
Recommended load: Up to 1.5 kg
Made in Japan/handcrafted

NEW Wooden Camera Strap [Minimo]

ULYSSES -photo life laboratories- — 2026-05-02T11:00:41+09:00

"Minimo", the Italian word for "minimum", is literally our smallest strap to protect your compact camera and mobile phone from suddenly falling. It also allows you to easily find them in your bag and pocket. Importantly—the "Minimo" is made from natural wood, thus your equipment won’t be marked or damaged from the strap itself.
The "Minimo" was born from our desire to develop a strap that is not just a "convenient tool" but something that we not only use every day, but also becomes an "important partner" that we use with deep affection and feel like we want to touch.

You can choose from 4 types of wood(Bubinga, Walnut, Kasi(Oak) and Hard-Maple.

[Bubinga]
Bubinga is characterized by its exceptional density and strength, offering high resilience against snapping and splitting. Its lustrous reddish-brown hue has earned it the name "African Rosewood" in the West. Due to recent population declines and stricter import regulations, this timber is becoming an increasingly rare and valuable material.

[Walnut]
Celebrated alongside Mahogany and Teak as one of the world's three most prized woods. Highly resistant to cracking and offering excellent workability, Walnut trees grow straight to heights of 30–40 meters, allowing for efficient use of the timber. It has long been cherished as a premier material for high-end furniture and fine craftsmanship.

[Kasi(Oak)]
Historically preferred for heavy-duty tool handles like axes and hammers due to its superior shock resistance, Japanese Oak (Kashi) is an incredibly hard and dense wood. Rare specimens featuring a cross-section resembling a large flower are known as "Botan" (Peony); when sawn, these pieces reveal unique, irregular striped patterns.

[Hard-Maple]
Also known as Sugar Maple, this is the tree that provides the sweet syrup essential for pancakes and whose leaf adorns the Canadian flag. Beyond its iconic status, the wood is highly resistant to shock and wear, boasting a dense grain with a beautiful, natural luster.

[Specifications]
Material: Natural Wood, PE
Withstand load: Less than 500 grams
Made in Japan/ hand crafted
Size: Diameter: about 22 mm of inside
Internal Circumference: about 70 mm
Length of the String: about 75 mm

Leather Wrist Strap [SPUTNIK]

ULYSSES -photo life laboratories- — 2026-05-02T00:40:38+09:00

SPUTNIK is the wrist strap for all the compact cameras and mirrorless cameras. It will fit your wrist and prevent your precious camera from falling. Its name is derived from the Russian satellite “SPUTNIK”, which means "a fellow traveler" in Russian. The satellite was launched in 1957, the first for the world. The strap will bind you and your camera; exactly like the earth and the “SPUTNIK” satellite was bound by an invisible rope called gravitation.

[ Assist You not to Drop your Camera ]
The loop strap will be fastened like a lasso and just fit to your wrist accordingly to the users’ size protecting the camera from dropping.

Moreover, since the strap becomes wider towards the middle, the loop will not squeeze your wrist unnecessarily.

(As the picture shown, after putting your wrist through the strap, the loop tightens as you pull the strap and twist your wrist inward at the same time.)

[ Simple and Beautiful ]
The structure of the strap is like a lasso. When it fits to your wrist, there is always one simple straight line from the camera to the wrist. Moreover the width of the strap is so thin that it stretches flexibly and also look cool.

[ Durable Thick Cord ]
The cord from the buckle is thick so it is extremely durable. In addition, the rivet to raise strength has a settled taste with rust proofing.

[ Perfect Size ]
Being just “the right size”, not too big nor too small, the strap is available from compact cameras to mirrorless cameras.

[ Precautions ]
This product is not designed for hanging your camera or to use with strong tension repeatedly. Please use this as a supporting item to reduce the risk of dropping your camera.

[Specifications]
Material; Leather, resin, metal
Recommended load: Up to 700 g
Made in Japan/handcrafted

Leather Camera Body Suit [for SONY a7R IV / a9 II / a7S III]

ULYSSES -photo life laboratories- — 2026-05-01T17:09:48+09:00

This is the body suit perfectly fits the Sony a7R IV, a9 II and a7S III.

With this body suit, the height of the grip increases by one centimeter for the lower parts, which greatly enhances the hold and secure grasp.

The material is the highest-grade vegetable-tanned Italian Pueblo leather from BADALASSI CARLO, which has the damage processing. You don’t have to worry about scratches even if it’s handled roughly.

Also the vegetable-tanned Italian leather from TEMPESTI, called “Texas”, is used only for Piombo body suit, which has a feature of soft and higher grip, different from smooth texture of Puebro leather. You can enjoy the leather’s ‘aging’-- the leather will change to a deeper color and become throatier as you use it.

#Please note: You cannot use this body suit for the a7 IV, a7 III, a7R III and a9 or previous of this series. Please be careful.

The body suit won’t disturb any of camera’s function buttons or movement of the tilt-up monitor. Functionality is paramount for us at Ulysses!

You use a special brass screw to affix the case and the camera.

It’s not necessary to remove the body suit every time you want to change batteries or remove your SD card.

All kinds of ports besides the sync terminal are open.

[ Specifications ]
Material: Leather, PE, metal (hook)
Made in Japan/ hand crafted

The Tripod Screw (11mm)

ULYSSES -photo life laboratories- — 2026-05-01T16:02:58+09:00

This is the tripod screw to affix the following body suit onto your camera. This screw is also made of brass and has a height of 11mm. Here are the makes:

Body Suit for Sony a7/a7R/a7S
Body Suit for SONY RX1/RX1R
Body Suit for FUJIFILM X-T1

We at Ulysses think it’s a great to always have a back-up screw in case of loss or misplacement. Be prepared—don’t miss the shot!

The Tripod Screw (14.5mm)

ULYSSES -photo life laboratories- — 2026-05-01T16:02:44+09:00

This is the tripod screw to affix the following body suit onto your camera. The screw is made of brass and has a height of 14.5mm. The screw is perfect to attach the body suit to the following camera models:

Body Suit for SONY a7III/a7RIII/a9
Body Suit for SONY a7II/a7RII/a7SII
Body Suit for SONY RX1R2

Body Suit for FUJIFILM X-Pro2

Body Suit for FUJIFILM X100F
Body Suit for FUJIFILM X100T/X100S/X100

Body Suit for OLYMPUS OM-D E-M5 Mark II

We at Ulysses think it’s a great to always have a back-up screw in case of loss or misplacement. Be prepared—don’t miss the shot!

Note: Please make sure you can’t use this screw for Sony a7/a7R/a7S body suit.
Please be careful, since the names of the camera and the appearances are closely related.

Connector Parts (The Standard Cord)

ULYSSES -photo life laboratories- — 2026-05-01T16:02:18+09:00

Spare connector parts with a standard broad cord to use our leather strap CLASSICO SERPENTE and wrist strap SPUTNIK. It comes in a set of two.

The connector is made with a very durable resin. The width of the hole is 10mm. The length of the cord is about 40mm when folded in two

When you attach these connectors to your compact digital camera whose eyelets are very small, you can use a strap providing that the point of the strap is within a 10mm eyelet.

Wood Grip for the RX100 Series

ULYSSES -photo life laboratories- — 2026-05-01T16:01:35+09:00

For its compact body, "RX100" series cameras are stuffed full of sophisticated functions. On the contrary to its small appearance, you can feel the weight transmitted from fingers holding the camera, and can realize that the camera you are using is surely a great stuff.

To improve slippery grip feeling of RX100 series, we, Ulysses, made the wooden grip from natural wood. Its shape with high and low parts enables the user to hold the camera comfortably and securely with light power.

Not only to enhance practical utility for the secure grip, the wooden grip gives warmth to its metallic appearance of the camera and you can find it as the accessory to make the camera look good; you can enjoy “your own RX100”.

You can use the grip for all the RX100 series from first RX100 to RX100M2, RX100M3, RX100M4, RX100M5, RX100M5A and RX100M6.
(Double-stick tape is put on its back to install the grip to the camera.)

[ Material #1: Walnut Wood ]
Walnut tree is described as one of the three most precious trees along with Mahogany and Teak. It has been used to make luxury furniture and art crafts from the old days since it grows straight to 30-40m and it is not breakable and useful to be processed.

[ Material #2: Sapele Wood ]
Sapele trees, which also reaches 40-60m, are distributed in the rain forest in countries like Congo, Uganda, Cote d'Ivoire, Ghana and Nigeria located around the African equator. There are beautiful stripes and transparent feelings on the surface of the wood, and expression changes with reflection of light. It's a little reddish color compared to walnut.

[ Specifications ]
Material; Natural Wood
Size: W27 x H38 x D14mm
Weight: 7g (0.24oz)
Made in Japan

Camera wrap Hexa

ULYSSES -photo life laboratories- — 2026-05-01T16:00:48+09:00

[Wrap Easily and neatly]
This innovative camera wrap progressed more from plain flat wrapping clothes. The unique hexagonal and half-boxed shape is the key to wrap intuitively.

Placing your camera along the sidewall of Hexa helps you to wrap it instantly in the same position and hold neatly every time you do.

Go anywhere together and be stylish.
Using Hexa, you can go photo shooting light without chunky camera pouch / bag and the rich and silky fabric adds a cool accent to your style too. It is easy to wrap your camera not only putting it on the table but while carrying outdoor.

[How to wrap]
YouTube

[How to fold up]
YouTube
you can see the same instructions by scanning QR code of “SAHO” label attached to Hexa.

[Specifications]
Material; Black and Brown - cowhide leather, Greige – goat leather, NY, PL, PC, PA, S/S
Size:53×H38.5cm, 89g appx
Made in Japan/ Hand crafted

Mask holder [PETTINE]

ULYSSES -photo life laboratories- — 2026-05-01T16:00:21+09:00

Must have item for new life style.
To protect both ourselves and others, masks are the essential face covering these day.
We create " PETTINE" as a carrying case for facial mask.
It is a special room for your mask and enable you to hold the mask safely in place during lunch break or running.

[ Keep it clean ]
Not only the inside, but the outside of fascial mask can get harmful substances in the atmosphere.
PETTINE's simple bifold sturucture prevents the dust and other substances transferring from outside to inside of the mask.

The white colour side is a PVC coated polyester. It can be wipe and clean by alcohol disinfectant.

[ Slim and stylish ]
PETTINE is thin and small enough to fit into your pocket, made of durable cotton canvas accessorised with a natural Italian veg tanned leather.

[ Specification ]
Material: cotton, Black-nylon, PVC coated polyester, leather, metal button
Hand made in Japan
Weight:30g

Key Chain [OTTO]

ULYSSES -photo life laboratories- — 2026-05-01T15:59:39+09:00

[ Nothing but a Key Chain ]
OTTO consists of just two circles, one for your finger and one to hold keys. Ulysses presents a key chain, which just looks like the number eight. "OTTO" is eight in Italian.

At the beginning of 2017, when we here at Ulysses started to think about making a leather key case, we asked you what kind of key ring you would want. Many of you answered that you wanted a key chain rather than a case. You told us that you wanted the ‘OTTO’—you wanted simplicity in design and an extremely cool look.

To just hold keys a ring or a carabiner will do the job. But you didn’t want that. Neither did you want something elaborate or impractical.

We understood what you meant clearly because we felt exactly the same. Something that doesn’t appear to be something it’s not and something that didn’t reduce function. The soft shape makes you feel like touching it. We sought "simplicity and function" and we found it in the ‘OTTO’.

[ Weight is Just Right ]
It’s neither too heavy nor too light to carry. OTTO is made of brass, which has been melted and poured into a mold. It's small by design, but has some weight, which you can feel when it’s in your palm.

[ Enjoy the Aging Process ]
After use, the ‘OTTO’ loses its glossy luster and gradually changes into a darkish texture. Fully enjoy the characteristic of brass over time.
(Picture-- Right key chain is new and the one on the left is one week old)

[ Attach and Detach Rings ]
See the place where the brass is thin. This is the place where rings should be attached and detached.

Brass rings are widened and of course misplaced more easily when you detach any of the 5 rings. So, we recommend not detaching rings even if there are some that you don’t use.
When you want to attach larger keys and or parts, the brass rings open wide but the gap might not close. Please understand it is peculiar characteristic of the material brass.

It's possible to make an additional purchase of exclusive double brass rings.

[ Optional Leather Cord ]
There is an optional leather cord. With the leather cord, it’s very easy to find the ‘OTTO in your bag.

[ Specifications ]
Material: Metal (Brass)
Made in Japan/ hand crafted
Size: W30 x H55 x D5 mm
(approx. 22mm is the inside diameter of the larger circle and approx. 18mm is the inside diameter of the smaller circle)

Short Leather Cord

ULYSSES -photo life laboratories- — 2026-05-01T15:59:13+09:00

This is an optional leather cord to attach to L Zip Wallet "COMODO" and our Key Chain "OTTO". Most common wallet code is often　50cm - 60cm long to stand out, however Ulysses made 37cm long code which is "discreet and good quality code for the adult".

[ Both Ends are Loop Clutch and Ring ]
One end of the code is a ring to attach the code to things with wider diameter. You can attach the code, not only to the belt loop but also to the handle of various kinds of bags you have.

[ Specifications ]
Material: Leather, Metal
Made in Japan/ hand crafted
Size: 370mm

Key Case [CASTANGNETTE]

ULYSSES -photo life laboratories- — 2026-05-01T15:58:37+09:00

Compact Key Case to Store Smart Car Keys and Other Keys

[ Tidy Storage ]
Four keys, one smart car key, one card key and one bicycle key can be stored in this key case! Very tidy!

[ Smooth Car Key Delivery ]
A smart key can be delivered smoothly. For the key is not connected with metal fittings, passing the key to someone is no trouble at all, when parking a car or handing the key to other family members.

[ No Damage Caused by to the Items in the Bag ]
Since there are no metal fittings at all outside the case and the keys are covered tightly, CASTANGNETTE is no harm to the other items inside the bag. It’s very gentle key case!

[ Specifications ]
Material: Leather, resin, metal
Made in Japan/ hand crafted
Weight: Approximately 42g

L-zip wallet [COMODO LIBERTA]

ULYSSES -photo life laboratories- — 2026-05-01T15:58:09+09:00

Liberta means “freedom” in Italian. Wear around your neck and go out light. It holds essential everyday items comfortably as a key, some coins and most frequently used cards. Neck wallet is a stylish and practical choice in new cashless lifestyle.

Example of use
-1key, 2 bills, 8 coins, 4 cards

[ Easy access to cards and money ]
The w shaped gusset structure of Liberta makes it open wide and the shallow coin space helps to see everything inside. This high visibility of Liberta can make you pick up anything you need quickly at tills, cashpoints and parking.

*Please note:
Liberta’s inner coin space is designed the shallowest possible and has no closure. Please keep Liberta standing with one hand while opening and closing zip.

[ Spare key / SD card slot ]
1 slot placed under coin space is not readily noticeable and perfect for key storage. SD memory card can also be fitted in.

[ YKK EXCELLA® fastener ]
Excella boasts beautifully polished elements. The YKK’s highest grade fastener adds a graceful look to this distinctive neck wallet.
https://www.ykkfastening.com/products/search/detail.html?pdid1=EXCELLA(R)

[ Specifications ]
Materials: leather, nylon, metal, cotton (cord)
Hand made in Japan
Width: 70mm, Height: 100mm, Depth:13mm
Weight: approx. 60g

L-zip wallet [Comodo Piazza]

ULYSSES -photo life laboratories- — 2026-05-01T15:57:34+09:00

[ The classic L-zip wallet revived for the cashless era ]
[Comodo Piazza] joins the ULYSSES L-zip wallet lineup. ULYSSES already has the popular wallet [Comodo]. We downsized Piazza from it, while maintaining the features of valuing the ease of use as a wallet.

[ Evolving a little bit more, to you as always. ]
The reason for Comodo Piazza's birth was a murmur from a ULYSSES staff member who said, "I have been using [Comodo] and I like it, but I don't carry so much in my wallet anymore.”

With the recent introduction of mobile payments, now we have less cash to carry around, and can manage membership and loyalty cards with mobile apps. Cash and cards in wallets became less and less than they used to be before he realized.

You can go out light with this charming and squarish [Comodo Piazza] , which is a perfect size in your hand with high operability.

[ Thin and easy to expand bellows ]
The "gusset" on the side is a small bellows shape. It plays an important role to open the wallet wide and take cards and bills in and out smoothly. [Comodo Piazza] has a thinner and simpler gusset than [Comodo] by keeping its functionality while minimizing the bellows. It fits lightly and smartly in a business suit pocket.

[ Holds what you really need for ]
Even though cashless payment has become the mainstream, many people still need cash in case of emergency or need to carry a few cards, even if they organize them minimally.　[Comodo Piazza] is thin and compact, yet it can hold everything you need for your daily life.

The recommended style of using [Comodo Piazza] comfortably is to carry three frequently used cards, plus cash for emergencies.

Storage Example - [Comodo Piazza] can hold more than below technically.
3 cards (1 traffic system IC card, 2 credit/debit card)
2 notes
10 coins
1 key

We also have the [L-Zip Wallet Comodo] for a larger capacity. Choose the best to fit your lifestyle.

[ Coin pocket, the least possible depth ]
You can quickly look through the contents and see at a glance where, what, and how much is in [Comodo Piazza]. Smooth access to cards, bills, and coins means no more fumbling in front of the cash register.

The just barely shallow boat-shaped coin pocket in the center of the wallet is a major feature of the [Comodo Piazza].　You may be surprised at how shallow it is, but this is the key to comfortable use. Once you get used to it, it sets you free from your stress of fumbling in your wallet for coins.
There also is a secret pocket for an SD card or keys just below the coin pocket.

When opening and closing the zipper, be sure to hold the purse standing vertically.

[ Specifications ]
Materials: cowhide leather (bridle black), goatskin leather (silver), PE, NY, metal
Production: Made in Japan/Handmade
Weight: approx. 60g
Size：W98 x H102 x D13mm (Thickness when unused)
-Since natural leather is used, there will be changes in color and texture over time after use.
-Product specifications are subject to change without notice for improvement.
-Silver goatskin leather may contain small scratches and uneven coloring that are originally included.

L-zip wallet [COMODO]

ULYSSES -photo life laboratories- — 2026-05-01T15:56:47+09:00

[ Let's start 'thinner without reducing' ]
COMODO is a creative wallet designed through numerous trials and errors, especially for a stress-free user experience

[ Compact yet hold 14 cards all together ]
The cards are not partitioned one by one. This is one of the secrets of both slimness and high capacity.
Example of Japanese money storage: 14 cards, 16 coins, 10 notes.

[ Shallow coin pocket for good visibility ]
The coin purse is just shallow enough to prevent coins from spilling out, so that the type of coin can be clearly identified at a glance. It also allowed the coin and card spaces could be shifted up and down to avoid overlapping. This further helps to slim down the total wallet size.
*Please note: The zip of the wallet should be opened and closed with the wallet in the upright position.

[ Accordion gusset for wide opening ]
A W-shaped gusset on one side allows the wallet to be opened wide, contributing to easy access to cards and notes.

[ Carefully selected fastening ]
The use of YKK's high-grade "EXCELLA" zips ensures smooth opening and closing. The automatic slider, which locks when the puller is released, ensures that the zipper will not open unintentionally.

[ Logo mark for smart payment ]
Embossed "ULYSSES" name on one side. You can smoothly use the ticket gate and smart payments if you store your cards on that side.

[ Extra pocket for key or SD card ]
There is a hidden pocket for a spare key or SD card underneath the coin pocket just in case.

[ Two patterns of banknote storage ]
Stow notes across the central divider to avoid weave marks on new banknotes. It can be conveniently divided into left- and right-hand sections for notes and cards. Organize them to your liking.

[ Color Variations ]
>>Bridle Black
>>Bridle Navy
The traditional bridle leather is used outside of Black color Comodo. This smooth and fascinating waxed surface was created at J & E Sedgwick’s in Walsall, UK. There is always a long waiting list for this well-known bridle leather. Bridle leather has white floating wax crystals on surface, known as blooms, that capture the hearts of leather lovers.

>>Sibilla Cenere
High quality vegetable tanned leather by Tempesti in the Tuscany region of Italy.
This leather has white floating wax crystals on surface, known as blooms, that capture the hearts of leather lovers.

>>Silver
This silver is a ULYSSES original color leather made from domestic goat leather.
A further layer of white pigment is applied expressively by hand over the silver-colored leather.

*Leather color and texture may vary between individuals.
It may have small flaws, uneven color, wrinkles, black spots, etc., depending on the time of purchase and individual differences.

[ Specifications ]
Materials: leather, PE, metal
Hand made in Japan
Width: 95mm, Height: 123mm, Depth:13mm
Weight: approx. 62g

Leather Camera Case [new CUSCINO]

ULYSSES -photo life laboratories- — 2026-05-01T15:56:12+09:00

Cuscino is an Italian word for “cushion” or “pillow”.

This camera pouch, excellent in quality, will wrap your camera softly like “a cushion” or “a pillow and protect it from being knocked or damaged, even when you need to throw it in your bag. We made this pouch for those who love to carry around their favorite cameras daily.

[ Just Right—fits perfect ]
Cuscino—this beautiful high quality leather camera case perfectly fits a high-definition compact camera like the Ricoh GR3(GR3x), Sony RX100 series, Canon G7X, Nikon COOLPIX, Fuji film XQ2 and other cameras alike. It’s designed to be able to carry your camera in your bag on a daily basis. It is neither too tight nor too loose, and easy to take out or put away. Fitting feel and usability has been our only concern when we designed this pouch and the Cuscino is not just exquisite in quality but the perfect size.

[ Magnetic Snap Opening & Closing ]
This indispensable magnet is embedded in both sides of the pouch—in the lid and the case and you can open and close the lid easily and rightly. Since the magnet is embedded inside, you can’t see it, keeping the style simple but adding a unique professional finish.
(Please note: Don’t worry about the magnet force influencing on the functions of the camera)

[ Luxurious—One Piece Leather Tailoring ]
The Cuscino is cut out from one sheet of leather and there is no seam between the cases lid and the main body of the pouch. This screams quality and class. The number of the cases made from one sheet of leather is so few highlighting the fact that we at Ulysses care about not only function but also design.

[ Exquisite Material ]
The material is the vegetable-tanned Italian leather.
The leather is soft and gently fits the shape of the camera.

[ Two Different Size Types ]
W120×H70×D42mm(inside)

【 Specifications 】
Material; Leather, PE, Magnet
Made in Japan/ All Crafted by Hand

----------------------Customer Reviews----------------------
Nickname - owenyoonseoklee
Rating - 5/5 Excellent

I purchased Leather Camera Case CUSCINO(brown, smaller size) and I am stunned by this amazingly crafted and beautiful product. Stitches are beautifully crafted and the leather quality is to the finest, well choreographed with smooth inner material which feels like suede. First and foremost, it perfectly fits my SONY RX100 M3, it's not too snug and it's not too loose. In terms of protection, if you have a brief compartment in your bag or do not carry anything sharp, heavy that may harm your camera when the whole bag shakes, the case will be a suitable choice.

Aside from numerable goodness of this product, there are some that needs to be improved.
First of all, since the smaller size CUSCINO is so in the right size, it is little bit clumsy when you pull out your camera from the case. You could pull it with wrist or neck strap, but pulling it out with wrist strap doesn't work so well because the strap only pulls one corner out of the case and the case doesn't have enough space or the camera to be tilted.
Secondly, since the leather has been modified along the time and usage, camera lense shape is reflected to the case, which is okay since the upper part covers it. In addition, the spot where magnet is embedded become tamped due to the frequent opening and closing.
Lastly, small size case looks the best when the camera is not inside of the case. I personally don't like when the shape of the whole thing becomes like a ribbon because the middle part of the camera is thicker due to the lense thickness, which pulls more surface of leather that makes the two corners have too much space. (It is hard to describe via writing, so please take a look at the picture showing both bigger and smaller size of the case in the website.)

But mostly, I really love and think that this case might be something that I can use for more than 5 years, and my friends all like it too. One more benefit of this case is that it gives you a feeling that you are using something that is not widely used, but so well made. I cannot find any internet reviews in the biggest Korean search engine.
----------

Nickname - Ignace Maenhaut
Rating - 5/5 Excellent

If possible I would like to give it 6 stars :)

The small leather camera case [CUSCINO] is exceptional, beautifully crafted, the look and feel are amazing.
Maybe a detail but the packaging is also wonderful.
The quality and the color are as advertised and the service impeccable!
Craftsmanship in every detail!

Thank you very much!
----------

iPad bag [ DRIFT 2 ]

ULYSSES -photo life laboratories- — 2026-05-01T15:55:40+09:00

DRIFT2: The "Unitized" Daily Carry

DRIFT2 is not your typical "minimalist" bag. It is designed around the concept of "Essential Unitization." Just grab it as you walk out the door, and you are set for the whole day—whether for work or play.

Inspired by Foreign Correspondents

The idea originated from broadcast journalists working overseas. To be ready for an assignment at a moment's notice, they keep pre-packed "Go Bags" at their entryway: Unit A for overnight trips, Unit B for a week, Unit C for a month. They simply grab the right unit and head straight for the airport.

Applied to Daily Life

DRIFT2 brings this concept to your everyday routine. By packing your personal "Unit A" into this single bag, you can leave the house every morning without a second thought. It frees you from the anxiety of leaving essentials behind, ensuring you have exactly what you need for the day.

Instant Accessibility: Speed Matters

Zero-Lag Access

When inspiration strikes, you want to capture it immediately. When you need to look something up, you want to do it now. Standard gadget bags often have a "ceiling" (top flap) that gets in the way when trying to pull out an iPad vertically. DRIFT2 features a "ceiling-less" design, allowing you to draw your iPad smoothly and start using it without stress.

The "Quick Opener" Mechanism

Removing the "ceiling" allowed us to create the Quick Opener. The bag opens wide instantly with nothing blocking your view, letting you identify exactly where everything is at a single glance.

Smart Storage Solutions

A Prime Spot for Your Smartphone

We created a dedicated pocket with direct external access for your most frequently used item. The interior is lined with a soft, brushed material to protect your device. It is also perfect for temporarily stowing ("Choi-oki") your phone while in transit.

Dedicated Pencil Storage

The iPad compartment includes a specific holder for the Apple Pencil. While magnetic charging is convenient, the pencil often detaches during transport. A dedicated slot keeps it secure and ready for action.

"Private Rooms" for Every Item

To prevent your favorite gear from scratching against each other, every item has its own designated place.

We meticulously designed DRIFT2 to maximize space efficiency.

By offsetting pockets vertically, horizontally, and depth-wise, we eliminated dead space.

The result is a bag that:

Holds more than it looks.
Keeps everything organized and visible.

The "Attic" Pockets

To utilize the dead space often found in the upper half of shoulder bags, we added two "Attic Pockets" on the underside of the flap. Made of mesh for visibility, these are perfect for small items that usually get lost at the bottom (e.g., AirPods, AirTags, cables, lip balm, eye drops).

Storage Example

Even with high-density organization, there is still room to spare.

Flexible Compartments

Main Compartment Features a movable divider secured with Velcro. You can adjust the position to customize the partition ratio exactly to your liking.

Front Space (Tunnel Structure)

The two front spaces inside use a "bottomless" tunnel-like structure. This allows longer items to sink deep without snagging, making full use of the bag's vertical space.

Rear Pocket

A back pocket designed for flat items. Perfect for managing A5 documents, tickets, vouchers, passports, brochures, or notebooks.

Comfort & Mobility

Equipped with "Thumb Slider"

The popular quick-adjust feature from the original DRIFT returns. You can adjust the strap length instantly just by sliding it with your thumb. The strap is made of wide 38mm tape to prevent it from digging into your shoulder, reducing fatigue during long use.

Cross Strap Included

For cyclists, the bag comes with a cross-strap to prevent it from sliding forward when you lean over. Connect one end to the bag's D-ring and the other to the shoulder strap for a secure fit.

Camera Ready

Quick-Draw Capability

With DRIFT2, you can pull your camera out in an instant, ensuring you never miss a shutter chance.

It will undoubtedly increase your camera's usage rate. With clever layout adjustments, it fits not only compact cameras but also small mirrorless setups.

Camera Storage Examples

Comfortably Fits (Safe Size):

RICOH GR3
FUJIFILM X100VI

Fits with Care (Tight Fit): Depending on other contents and lens size (pancake lenses recommended), the following models can fit:

FUJIFILM X-T50 (and X-T double-digit series)
FUJIFILM X-S20
FUJIFILM X-M5
FUJIFILM X-E5 (Please note that storing these cameras may give the bag a slightly fuller appearance.)

Superior Durability

High-Performance Material

We adopted "RBC840 Ballistic" from Challenge Outdoor. It offers excellent abrasion resistance and durability. It also features water repellency and stain resistance, handling light rain and daily wear with ease.

Specifications

Photographer's tote bag [Shooter's tote]

ULYSSES -photo life laboratories- — 2026-05-01T15:55:20+09:00

ULYSSES introduce a practical and stylish tote bag for everyday use to cater to street photographers.
This bag was designed with attention to detail for functional use and it looks great not only on a shoot, but also walking down the street to your office.

[ Versatile, quick and quiet bag insert system ]
Our original bag insert takes the role of flexible dividing and cushioning to hold your gear neatly and safely.
Setting two boxed shaped dividers, "Sliding Box", create spaces as you like in the insert.
To change the position of "Sliding Box" is very quick and it does not make annoying noises unlike verclo attatchment.
This insert also makes the bag structure much more stable, so that the tote bag can stand still on a table without supporting by hands.

[ How to use " Sliding Box" ]
1. Slip two arms of "Sliding Box" into each Guide Rails which stand along the both walls of bag insert.
2. Simply slide and set the boxes wherever you like to fit your camera and personal essentials.

[ Custom made veg tanned leather & cotton canvas ]
Using fine European leather hide, we ordered to produce special colours only for this tote bag.
The leather is tannded with full of natural ingredients, and changes its colour fascinatingly by aging.
The fabric is a durable cotton cavas dyed exclusively for ULYSSES. On top of that, washing process was carefully added to enhance the fabric's unique texture.

[ Various bag pokets ]
3 large comparments -1 zippped
1 zipped inner poket
1 tablet PC pockes - holds iPad Pro 11-in
2 mesh pocket - hold iPhone12 Pro max
2 pencil holders
1 exterior pocket

[ Others ]
Padded bottom for extra protection to hold laptop and large tablet as iPad Pro 12.9-in
Luggage handle pass- through leather strap with button fastener.

[ Specifications ]
Tote bag
L x W x H) 40x14x34cm - internal:37x13x26cm
Bag Insert
L x W x H) 36x11x17(23)cm - internal: 35x10x16(23)cm
Material: cow leather, cotton, nylon, PU and urethane form, zinc alloy
Production: India
Weight: about 1.7kg

Leather Camera Strap [SLING SHOT]

ULYSSES -photo life laboratories- — 2026-05-01T15:53:59+09:00

Here at Ulysses we have done it again with our new leather camera strap—the New SLING SHOT. It’s our take on a rather broad but simple strap. You can use this strap for any single-lens reflex, mirrorless digital camera　and rangefinder will be perfect for the SLING SHOT, but the camera has to be equipped with round eyelets.
Although the SLING SHOT allows for supple movement, it is flexible and excellent to handle, which further enhances its simplicity in design.

[ Two Different kinds of leather are Used ]
Two different kinds of leather are used for the neck part of the strap: for the surface, the highest-grade vegetable-tanned Italian Pueblo(or Babel) leather is employed. Vegetable-tanned Minerva leather—of course from the same tannery, is used for the back of the strap.
The combination of the delicate damage processed Pueblo(or Babel) leather and Minerva leather with its crimped surface makes the strap strong yet flexible. (The color of the back of the strap is tan for its entirety.)

[ The Ultimate Simple Design ]
This strap has been designed to provide only the necessity of function, leaving you with the ultimate simple design. The neck part of the leather fits softly to the body giving a delicate, mild and special feel. And by using a strip of leather for the rest of the strap, no part of the strap stands out and of course it doesn’t hinder camera operation in any way.

[ Ring Guard ]
A ring guard is attached to the strap. This protects the camera from getting marked or scratched by the metal ring. Unobtrusive is not only a key design feature we strive for but one of our strengths here at Ulysses. The ring guard is made to its most minimal; the shape is therefore slightly oval, not exactly round.

Another advantage of the ring being fixed with a ring guard, the camera doesn’t turn about freely nor the strap be twisted.

*Please Note
You can use this strap for the camera with round eyelets but not with any slit type eyelets. You need to remove the triangle rings attached to the camera before installing your strap.

Please refer to How to Remove the Triangle Rings.

[ Our First Priority is Given to Protect the Camera ]
Since no metal is used for the strap itself, you can twist the strap around your camera wherever and whenever.

[ Specifications ]
Material; Leather, metal (ring)
Recommended load: Up to 1.0 kg
Made in Japan/handcrafted

----------------------Customer Reviews----------------------
Nickname - Tomozo13353
Rating - 5/5 Excellent

SLING SHOT is cool design and strong enough to hold my Leica M9. I like Italian leather too.

----------

Nickname: leetmode
Rating: 11/10

amazing quality and top notch leather work. Highly recommended for anyone who wants a high quality strap that does not bring too much attention.

I recently ordered the "Slingshot" camera strap in blue. This is the second start that I have purchased from you guys. Back in 2013 I ordered my first "Slingshot" strap from you in brown and absolutely love it. Since the day I received it I have had 0 problems with it whatsoever. The quality is top notch and I reiceve multiple comments about how good it looks and how well it complimented my Sony A7R. The newest strap that I ordered in Blue will be used for my Sony A7S. I have yet to put it on the camera but the blue color is vey beautiful and matches the A7S logo vey well. I'm confident that it will hold up just as well as the first strap that I purchased from you guys because the quality looks exactly the same. My only wish is that you guys offered a slightly longer strap. I'm sort of a big guy at 6ft and I like to place the strap across my shoulder so that I can carry the camera in a sort of sling manner, which at its current maximum length of 120cm is OK, but I really feel that it would be much better if there was a slightly longer option maybe somewhere between 130-140cm, it's hard to judge with out trying first but I really feel that if it were just a little bit longer for bigger and taller guys like myself it would be much better. I hope you understand what I am trying to say.

I'm not sure if you want to include everything I mentioned in my additional comments, but all that being said I love both straps and will definitely be buying from you guys again.

Leather Camera Strap [CLASSICO SERPENTE]

ULYSSES -photo life laboratories- — 2026-05-01T15:53:37+09:00

"SERPENTE" is the Italian word meaning “snake". We have named this strap "SERPENTE" because of the strap’s pointed end, which looks like the head of a snake flicking its forked tongue out.
The CLASSICO SERPENTE is a narrow string type strap best suited for high-end compact cameras, which can easily be suspended at two points on either side of your camera.
Since the strap is chunkier and more durable right down to its edge, the excellence of this strap will be felt for many years to come.

[ Two Different kinds of leather are Used ]
Two different kinds of leather are used for the strap: for the surface, the highest-grade vegetable-tanned Italian leather is employed. Vegetable-tanned Minerva leather—of course from the same tannery, is used for the back of the strap.
The combination of the delicate damage processed leather and the leather on the other side with its crimped surface makes the strap strong yet flexible.

[ Luxurious Leather Strap ]
The SERPENTE is luxuriously cut from one sheet of leather—as long as the 120cm L size strap, as well as the 105cm M size strap, the unique thing by being only one cut is that this makes the strap entirely seamless. This screams quality and class. The number of the straps made from one sheet of leather is so few highlighting the fact that we at Ulysses care about not only function but also design.

[ Fits for large range of cameras ]
You can use this strap not only for compact digital cameras but also for any single-lens reflex and mirrorless digital cameras as long as its weight is less than 1kg including the lens.

[ The Strength of the String ]
The string that goes through the eyelet is thick and excellent in wear and resistance. We demanded strength and durability for this integral part of the strap. You can easily attach and detach the strap by simply un-snapping the SERPENTE from the connector.

[ Our First Priority is Given to Protect the Camera ]
Since no metal is used for the strap itself, you can twist the strap around your camera wherever and whenever.

[ Ulysses’s Thinnest Strap ]
The width of CLASSICO SERPENTE is as narrow as 13mm, the narrowest model of ‘Classico’ series.

[ Find Enclosed ]
Synthetic fiber thread is enclosed to help pass the strap through the eyelet of your camera.

[ Specifications ]
Material; Leather, metal (ring)
Recommended load: Up to 1.0 kg
Made in Japan / handcrafted

Leather Strap [ CLASSICO VARIANTE ]

ULYSSES -photo life laboratories- — 2026-05-01T15:52:38+09:00

“What is the suitable strap for the age of mirrorless camera?” Abruptly, I wondered, when the development of the Variante has started from the question floated in my mind.

No bulky thickness, as slim as possible enough to hold and distribute the weight of the camera.
In fact the strap beside around the neck part should be slim and as much possible to be ignored, better to be seamless. Slim, broad and slim; we wanted to make one line strap which connects seamlessly to the end.

The Variante is different from any other strap Ulysses has ever made accordingly produced to the concept. It will surely be one unique strap that you would ever dreamed of.

The word variante means "mutation” and “variation" in Italian. The strap has named the Variante since it has features different from any other CLASSICO series.
It's the most suitable for compact to middle sized mirrorless, rangefinder and single-lens reflex cameras which has circular eyelets.

[ Two Different kinds of leather are Used ]
Two different kinds of leather are used for the strap: for the surface, the highest-grade vegetable-tanned Italian Pueblo leather is employed. Vegetable-tanned Minerva leather—of course from the same tannery, is used for the back of the strap.
The combination of the delicate damage processed Pueblo leather and Minerva leather with its crimped surface makes the strap strong yet flexible.

[ Sharp Silhouette ]
The width of the neck part is 26mm and other than that is 10mm. The Variante has sharp balanced silhouette which has minimum least width only for the necessary part.

[ Our First Priority is Given to Protect the Camera ]
Both ends of the strap has a ring guard so that the metal ring doesn’t damage the camera, which also stop the ring from rotating and so the strap won’t twist.
We use the originally grind ring for the strap, considering the easiness of attaching to the camera and the strength, after we examined the ring of wire diameter, the inside diameter and the material itself.

[ Some Cameras Cannot be Attached to the Variante ]
The Variante fits only to the cameras equipped with the "circular eyelets". You can't use the strap for the cameras equipped with the “slit type eyelet" such as Canon EOS series, so please be careful.
When your camera is equipped with triangle rings, you need to remove them before attaching the strap with round rings.
Please refer to the instructions on how to remove the triangle rings

[ Specifications ]
Material; Leather, Metal (Round Ring)
Recommended load: Up to 1.8 kg
Made in Japan and all handcrafted!

Detachable very short camera strap [ CORTO Libero ]

ULYSSES -photo life laboratories- — 2026-05-01T15:51:46+09:00

Since its release in October 2024, the "Very Short Strap CORTO" A new type has been added to the lineup.

The conventional "Very Short Strap CORTO" had a ring at the end and it could NOT be attached to some cameras, but the newly released "CORTO Libero" has a string at the end, so it can be attached to most cameras.

[ High-quality parts ]

The connector is made by OP/TECH. Each part can withstand a load of up to 20kg, making it extremely sturdy, yet extremely small. Its slim design means it doesn't stand out when attached to a camera, and it doesn't get in the way.
Because it is string-like, it is unnoticeable and slips through your fingers, so it can be used without stress regardless of the size of your hand or how you hold it.

[ One-touch removal ]

The connector can be easily removed with one touch. It can be used smoothly in situations where you want to remove the strap only for a short time, such as when shooting video or using a tripod. Even when you remove the strap, the parts remaining on the camera are small, so it does not disfigure the appearance of the camera.

Wrist Strap Sputnik or Leather Strap Classico Serpente, using the same connector, can be changed to each other. Doing it very quickly since the connector can be removed and attached with just one touch.

[ Choose the width to suit your camera ]

The CORTO Libero is available in two types, wide and slim.

WIDE

SLIM

With a slimmer width of 15mm, it is ideal for compact cameras and small mirrorless interchangeable-lens cameras (body + lens) with a total weight of 700g or less.
When attached to a small camera, it balances well with the camera and looks smart. The strap is thin but moderately wide that does not dig into your neck or shoulders. So that it can be used comfortably for long periods of time.

[ Simple and casual logo mark ]

The "Wide" model features the "ULYSSES" logo mark, while the "Slim" model features a simple "U" logo mark.

[ Color variations and materials used ]

It comes in two colors: graphite and black.
The strap itself is made of "Motohashi Tape" nylon, which has just the right amount of firmness, yet is smooth and soft. It is a highly abrasion-resistant tape.

Natural leather is used at the end of the strap as an accent.
The graphite leather is made from Japan's "Roloma," while the black leather is made from Bridle Leather by Sedwick of the UK. The leather is thin and carefully cut, with a supple texture that is also a highlight.

Black

Graphite

There are differences in the color and texture of the leather.

The actual color of the product may differ from that shown in the photo. Also, depending on the time of purchase of the leather material and individual differences, the texture may vary, such as wrinkles, grain, color, and the presence or absence of black spots.

[ Adjust length instantly ]

"Thumb-slider" allows you to instantly adjust the length

The CORTO and CORTO Libero feature Thumb-slider system that allows for smooth adjustment of the strap length.
You can instantly adjust the length by simply inserting your finger into the loop and sliding it.

The adjustment range is from 62cm to 105cm, which is an amazing 43cm of adjustment.

Another feature of the Thumb-slider is that it does not stretch out easily, allowing you to keep it at your preferred length.

[ Closely attached to the body ]

When climbing steep mountain paths or riding a bicycle, you tend to lean forward, so a long strap can cause the camera to swing around like a pendulum.
With the CORTO and CORTO Libero, you can wear the camera diagonally across your body and set it short, which allows you to hold the camera close to your body, you can reduce the risk of hitting it against something.

This is convenient because you can use both hands without worrying about the camera, even in places with poor footing.
Also, when you want to take a photo, you can instantly extend the thumb slider while the camera is still hanging diagonally.

[ Easy to wrap around your wrist ]

When set to its shortest length, it is just the right length to wrap around your wrist and also helps prevent it from falling.

[ Specifications ]

Material: Nylon, cowhide
Production: Made in Japan
Recommended load: Wide 1.5kg or less, Slim 700g or less

[ Differences in the Colt series ]

If you are interested in CORTO, please go to the page →Very Short Strap CORTO

Very short camera strap [ CORTO ]

ULYSSES -photo life laboratories- — 2026-05-01T15:51:03+09:00

[ I want to take pictures! Not with a smartphone! But with my camera.]

This strap meets that expectations.

You've been excited to take your camera to a trip that you can't go to often or to a once-in-a-lifetime event,

and at the moment you wanted to take a picture,
you ended up taking the picture with your smartphone.
...instead of taking the camera out of your bag.

Have you ever had that experience?

Hanging your camera on a long strap can get in the way of your body movements and make you have to be careful not to hit it.

With the Colt, which can be made very short, you can hang your camera "in front of your chest," which was difficult with previous straps, so you can always keep it ready to take a picture and it's as quick as a smartphone.

The Colt is a strap that was created for people who want to take important photos with their cameras, so you won't miss any photo opportunities.
Now you can concentrate on shooting at all times.

"The camera swings like a pendulum by your body movements and posture."
"You hit the camera against the belt buckle or other objects unintentionally."
"The crossbody bag gets in the way of your camera strap movement."

These types of stresses that come with long straps can be easily solved by shortening and hanging in front of your chest.
By preventing the camera from swinging and your camera and your body become one, you can concentrate purely on taking pictures.

[ Extends up to 105cm ]

When checking the monitor after shooting or when shooting with looking at the LCD monitor, you can smoothly lengthen the strap to keep it away from your face.

Also when shooting vertically, you can easily hold the camera.
The "thumb slider" allows you to adjust the length instantly.

[ Adjust length instantly ]

The Colt uses the "thumb slider," a mechanism that allows you to smoothly adjust the length of the strap, which has been proven effective in our bags [Chespock] and [DRIFT].

You can instantly adjust the length by simply inserting your finger into the loop and sliding it.
The adjustment range is 62cm to 105cm.

Another feature of the thumb slider is that it does not stretch out too much and you can keep it at your preferred length.

[ Close to the body ]

When climbing a steep mountain path, you tend to lean forward, so if the strap is too long, the camera tends to swing around like a pendulum.

The Colt is short in length, so you can keep the camera close to your body, reducing the risk of hitting it against the surroundings. In addition, since both hands are free, you can use it in places with poor footing.

[ Can be used wrapped around the wrist ]

At the shortest setting, it is the perfect length for wrapping around your wrist.

[Specifications]

Material; Nyron, Leather
Recommended load: Up to 1.5 kg
Made in Japan/handcrafted

[ Differences in the Colt series ]

If you are interested in CORTO Libero, please go to the page →Detachable very Short Strap CORTO Libero

Leather Camera Body Suit [for SONY RX100M7 / RX100M6]

ULYSSES -photo life laboratories- — 2026-05-01T15:50:17+09:00

This body suit fits for RX100 series of digital cameras from SONY. Not only for its latest RX100M7 and RX100M6 models, but you can use this body suit for RX100M5, RX100M4 and RX100M3 as well.

[ Attach and Remove More Quickly and More Easily ]
Functionality is paramount for us at Ulysses!

For the previous body suit model, since the RX100 series cameras are so compact, the battery compartment has to be covered by the body suit since the tripod hole is used to fix the body suit. So it was necessary to turn a screw and attach or remove a case every time you want to change the battery or the SD card.

Now we developed the "magnetic detachable" body suit which can attach and remove quickly and easily by magnetic attraction.

The camera won’t fall even if you hold it upside down, but the body suit can be removed so sassily when you twist it to the specific direction.

A neodymium magnet is embedded in a base of a body suit. A wooden stopper is installed in the location of the tripod hole to fix the camera.

By installing a slender grip, which greatly enhances the hold, you can hold the grip of the small and rather flat RX 100 camera body comfortably.

You can charge the camera with the suit on.

Since it’s very easy to detach the suit, you can just do it without so much trouble when using a tripod.
When you attach the camera to a tripod, the thickness of the iron plate stuck on a base isn't in the way since it's very thin.

The body suit won’t disturb the move of a tilt screen on the back.

[ Specifications ]
Material; Leather, PE, Wood, Iron Plate, Magnet
Made in Japan/ hand crafted
Weight; Approximately 45 g

Leather Camera Body Suit [for FUJIFILM X100V]

ULYSSES -photo life laboratories- — 2026-05-01T15:49:07+09:00

X100V Body Suit.

This is the body suit perfectly fits the Fuji X100V.　This suit protects the front and bottom of your camera from the damage.

The high quality leather comfortably fits your finger and enhances the grip. With this body suit, the height of the grip increases by one centimeter enabling your little fingers hold the grip tightly, which greatly enhances the hold and secure grasp.

The material of the Black and the Chocolate is the highest-grade vegetable-tanned Italian Puebro leather from BADALASSI CARLO, which has the damage processing. You don’t have to worry about scratches even if it’s handled roughly.

For the PIOMBO, also the highest-grade vegetable-tanned Italian leather called Texas from TENPESUTI, is used. The material has a feature of soft and higher grip, different from smooth texture of Puebro leather. You can enjoy the leather’s ‘aging’-- the leather will change to a deeper color and become throatier as you use it.

#Please note: You cannot use this body suit for the X100, X100S, X100T or X100F. Please be careful.

You can use the camera’s tilt-up monitor with this suit on. (The lower part of the monitor bothers a body suit a little when you tilt the monitor down. Please understand. )

The lid of the flip cover closes with magnet embedded in the cover. Since there is no metal hook, there is no discomfort feelings when you hold the grip.
(When you open the cover, please hold the upper part of the grip, like the picture shown, so as to avoid the deformation due to friction resistance.)

It’s not necessary to remove the body suit every time you want to change batteries or remove your SD card. The suit doesn’t disturb any access to various ports.

[ Specifications ]
Material: Leather, PE, metal, magnet
Made in Japan/ hand crafted

Leather Camera Body Suit [for FUJIFILM X100VI]

ULYSSES -photo life laboratories- — 2026-05-01T15:48:51+09:00

X100VI Body Suit.

This is the body suit perfectly fits the FUJIFILM X100VI.　This suit protects the front and bottom of your camera from the damage.

The high quality leather comfortably fits your finger and enhances the grip. With this body suit, the height of the grip increases by one centimeter enabling your little fingers hold the grip tightly, which greatly enhances the hold and secure grasp.

The material of the Castagno is the highest-grade vegetable-tanned Italian Puebro leather from BADALASSI CARLO, which has the damage processing. You don't have to worry about scratches even if it’s handled roughly.

For the Ash-gray, also the highest-grade leather made in Japan. The material has a smooth feel because of a wax coating on the surface.

For the Babel-nero, also the highest-grade vegetable-tanned Italian Babel leather from TEMPESTI. The look of this material is like a denim and is very unique. The color is like between black and navy.

#Please note: You cannot use this body suit for the other X100 series. Please be careful.

You can use the camera's tilt-up monitor with this suit on. (The lower part of the monitor bothers a body suit a little when you tilt the monitor down. Please understand. )

The lid of the flip cover closes with magnet embedded in the cover. Since there is no metal hook, there is no discomfort feelings when you hold the grip.
(When you open the cover, please hold the upper part of the grip, like the picture shown, so as to avoid the deformation due to friction resistance.)

It's not necessary to remove the body suit every time you want to change batteries or remove your SD card. The suit doesn't disturb any access to various ports.

[ Specifications ]
Material: Leather, PE, metal, magnet
Made in Japan/ hand crafted

Leather Camera Body Suit [for Ricoh GR3 / GR3x]

ULYSSES -photo life laboratories- — 2026-05-01T15:48:25+09:00

This is the simple stylish Body Suit exclusive for the Ricoh GR3. The camera will be wrapped by one leather like Japanese Origami craft! The highest-grade vegetable-tanned Italian Pueblo leather from BADALASSI CARLO, which has the damage processing, is used for the material.

*Please note!
You cannot use this body suit for the GR2, GR or GR digital series.

[ Attach with Three hooks ]
This GR3 body suit is made of one sheet of leather and enfold the camera with three hooks.

[ Pursue for Usability and Maximum Protection ]
The body suit is open for the buttons, the lever and the dial not to disturb operation whilst the camera is covered by the suit as far as possible with leather.

[ Available to Charge with the Suit on ]
You can open the port just to remove a hook on the grip side so that you can insert the cable to charge the battery and remove the image data with the suit on.

Leather Camera Body Suit [for Ricoh GR4]

ULYSSES -photo life laboratories- — 2026-05-01T01:05:31+09:00

Minimalist Leather Body Suit for Ricoh GR4

This is a minimalist leather case designed exclusively for the Ricoh GR4. Crafted from a single piece of distressed Italian vegetable-tanned leather, it wraps your camera with the precision and elegance of origami.

Secure 3-Snap Fastening

The GR4 Body Suit is constructed from a single piece of leather that envelops the camera body, secured firmly at three points with high-quality snap buttons.

Balance of Protection and Tactile Control

Every cutout is precision-engineered to ensure that buttons, levers, and dials remain fully accessible. While maintaining seamless functionality, we have maximized leather coverage to provide the highest level of protection.

Charge with the Case On

By simply undoing the snap button on the grip side, you can access the port without removing the case. This allows for convenient charging and data transfer via cable.

Color Variations

Available in Black, Navy, and Castagno.

ULYSSES -photo life laboratories-

Leather Strap [ 70% GRANDE ]

Leather Camera Strap [CLASSICO DRITTO]

Leather Camera Strap [CLASSICO]

*NEW* Wooden Camera Strap [Minimo]

Leather Wrist Strap [SPUTNIK]

Leather Camera Body Suit [for SONY a7R IV / a9 II / a7S III]

The Tripod Screw (11mm)

The Tripod Screw (14.5mm)

Connector Parts (The Standard Cord)

Wood Grip for the RX100 Series

Camera wrap Hexa

Mask holder [PETTINE]

Key Chain [OTTO]

Short Leather Cord

Key Case [CASTANGNETTE]

L-zip wallet [COMODO LIBERTA]

L-zip wallet [Comodo Piazza]

L-zip wallet [COMODO]

Leather Camera Case [new CUSCINO]

iPad bag [ DRIFT 2 ]

DRIFT2: The "Unitized" Daily Carry

Inspired by Foreign Correspondents

Applied to Daily Life

Instant Accessibility: Speed Matters

Zero-Lag Access

The "Quick Opener" Mechanism

Smart Storage Solutions

A Prime Spot for Your Smartphone

Dedicated Pencil Storage

"Private Rooms" for Every Item

The result is a bag that:

The "Attic" Pockets

Storage Example

Flexible Compartments

Front Space (Tunnel Structure)

Rear Pocket

Comfort & Mobility

Equipped with "Thumb Slider"

Cross Strap Included

Camera Ready

Quick-Draw Capability

Camera Storage Examples

Comfortably Fits (Safe Size):

Fits with Care (Tight Fit): Depending on other contents and lens size (pancake lenses recommended), the following models can fit:

Superior Durability

High-Performance Material

Specifications

Photographer's tote bag [Shooter's tote]

Leather Camera Strap [SLING SHOT]

Leather Camera Strap [CLASSICO SERPENTE]

Leather Strap [ CLASSICO VARIANTE ]

Detachable very short camera strap [ CORTO Libero ]

[ High-quality parts ]

[ One-touch removal ]

[ Choose the width to suit your camera ]

[ Simple and casual logo mark ]

[ Color variations and materials used ]

[ Adjust length instantly ]

[ Closely attached to the body ]

[ Easy to wrap around your wrist ]

[ Specifications ]

[ Differences in the Colt series ]

Very short camera strap [ CORTO ]

[ I want to take pictures! Not with a smartphone! But with my camera.]

[ Extends up to 105cm ]

[ Adjust length instantly ]

[ Close to the body ]

[ Can be used wrapped around the wrist ]

[Specifications]

[ Differences in the Colt series ]

Leather Camera Body Suit [for SONY RX100M7 / RX100M6]

Leather Camera Body Suit [for FUJIFILM X100V]

Leather Camera Body Suit [for FUJIFILM X100VI]

Leather Camera Body Suit [for Ricoh GR3 / GR3x]

Leather Camera Body Suit [for Ricoh GR4]

Minimalist Leather Body Suit for Ricoh GR4

Secure 3-Snap Fastening

Balance of Protection and Tactile Control

Charge with the Case On

NEW Wooden Camera Strap [Minimo]